Basic Requirements - Xerox 850DX - Phaser Color Solid Ink Printer User Manual

AccXES Client Tools User Guide

Basic Requirements

An AccXES Controller with v 4.0 or higher controller firmware, an AccXES
supported printer and an AccXES supported scanner (for scan to net features).
A Synergix Scan System and Color Scan-to-Net Feature Key are required for
Scanning-to-Net in color. A 9GB or larger controller's hard drive is highly
recommended for color scanning because scanning large color documents
results in large files that quickly consume hard drive space. This can create a
scanner error message requiring you to retrieve the Scan Directory's scanned
images to free up enough memory to scan more colored images.
Ÿ
AccXES Client Tools software.
Ÿ
A workstation running Windows 2000/XP, NT 4.0 (minimum service pack 3
and 16 bit color), or RedHat Linux with an Intel Pentium 90 Mhz or greater
(233 Mhz is recommended), or Mac OS X 10.2.x with Apple G3/G4/G5, or
a Sun Sparc workstation running Solaris v2.6, 2.7, or 2.8.
NOTE: The AccXES Client Tools software does not function over a
Novell network.
Ÿ
Other System Requirements:
- 64 MB of memory
- 30 MB available disk space
- CD-ROM drive (not required for installing from the XES web site)
- Mouse or other pointing device
- Screen resolution: 800x600 or higher
Ÿ
Appropriate protocols and ports enabled on both the printer and
workstation, with a connection established through the network or directly
between the printer and your workstation.
NOTE: The AccXES printers support the following types of files: CalComp,
Cals1, Cals2, NIRS, HPGL, HPGL/2, CGM, TIFF, JPEG, PDF (optional),
PostScript (optional). These file types are also listed on the Setup Tab > File
Format section of individual document and default document options.
6