Parameter Environment Summary; Accxes Environment Variables - Xerox 850DP - Phaser Color Solid Ink Printer Manual

This environment corresponds to the PJL Modified Print Environment in HP-PJL. It is associated with
individual jobs that have been created within the printer and have been submitted for scheduling.
These settings reflect the feature settings currently in effect at any point after a printer language is
entered.
The act of submitting the user job converts the Current User Job Environment for that job into the
Modified User Job Environment. If the user job data requests the settings of the current value of a
particular setting (such as a control-T embedded in a PostScript job), then this is the environment
reported on.
The XESJOBSET command may be used to change Job and Page Processing Group parameters in this
environment, as long as the job to which these parameters have been attached has not started
processing. In other words, XESJOBSET is effective during the window of time defined by the entry
into the job queue and the exit from the job queue.

5.1.3.5 Parameter Environment Summary

The table below summarizes the four environments in AccXES printers and their correspondence with
standard HP-PJL environments.
Table: AccXES vs. HP-PJL Parameter Environments
AccXES Standard HP-PJL
Environmen
Factory Factory Default
Default
User Default User Default
Current User PJL Current
Job Environment
Modified User Modified Print
Job Environment

5.1.4 AccXES Environment Variables

Version 10.0
AccXES PJL Interface
Description
The ROM copy of the environment
variables in effect at the time the
printer was first manufactured. Not
The NVRAM copy of the environment
variables in effect at each printer power
up. Can be restored to the Factory
Default values using the INITIALIZE
command. Changed by DEFAULT
command and queried with DINQUIRE.
Reflects the parameters associated with
the current user job. These parameters
are modified with the SET command
and are queried with the INQUIRE
command. The start of a PJL job or a
PJL reset "snapshots" the values from
the User Default environment.
The Current User Job Environment is
converted into the Modified User Job
Environment for each job after it has
been submitted to the Job
Scheduler/Spooler. SET commands may
no longer modify these parameters.
XESJOBSET may be used for page and
job parameter groups while the jobs are
in the job queue. Processing tasks
downstream of the spooler may modify
these parameters as well.
Page 30 of 160