Xesfeatures - Xerox 850DP - Phaser Color Solid Ink Printer Manual

Version 10.0
AccXES PJL Interface
This category reports on the generic system state of the ESS and print engine. It details the currently
printing job (if any) and the overall system state. The response defined for this INFO XES_SYS_STAT
command is:
@PJL INFO XES_SYS_STAT
USERJOBID=<User Job ID>
NAME="<JOB Name>"
PAGE=<Page Number>
COPY=<Copy Number>
STATE=<State>
<FF>
The USERJOBID and NAME fields denote the user job ID and name field (if available from the JOB
command) of the currently printing job, if any. PAGE displays the page number of the page currently
printing and COPY is the copy number. Note that if electronic collation is on, PAGE increments faster
than COPY. If collation is off, then COPY increments faster than page. If no job is currently printing,
then USERJOBID, NAME, PAGE, and COPY fields are empty. In the case of Plot Nesting with
Exclusive Mode, or Plot Nesting a multi-copy collated job, PAGE displays the number of the "NEST
PAGE" (physical page) currently printing. In all other Plot Nesting cases, PAGE and COPY will
display 0.
The STATE field is a snapshot of the ESSSTATE Environment variable in the ESS Group. Its valid
values are {IDLE, PROCESSING, PRINTING, ERROR, OPINTERVENTION, INIT, PAUSED}. Note
that OPINTERVENTION is displayed during media mismatch or manual feed operations.

6.18 XESFEATURES

This category is a custom AccXES extension to report the status of software features as enabled or
disabled. The defined response is:
@PJL INFO XESFEATURES
POSTSCRIPT=<Feature Status>
SCAN_TO_NET=<Feature Status>
JOB_ACCOUNTING=<Feature Status>
SCANNER_SPEED_ENHANCEMENT=<Feature Status>
SCANNER_COLOR=<Feature Status>
PRINTING=<Feature Status>
COPYING=<Feature Status>
VERSATEC_RASTER=<Feature Status>
VCGL=<Feature Status>
Page 118 of 160