Returned Status (Pre 6.2) - Xerox 850DP - Phaser Color Solid Ink Printer Manual

Version 10.0
AccXES PJL Interface
The functional detail of each ACTION is more fully described in the "AccXES Job Accounting
Specification".

4.1.1.2 Returned Status (pre 6.2)

After parsing the XESACCOUNTING command, the controller will echo the command, the appropriate
status, and a form-feed back on the sending channel as shown below:
@PJL COMMENT XESACCOUNTING ACTION=<action> ACCTNUM=<acctnum>
SUBACCTNUM=<subacctnum> UNITS=<units> B=<bond area #> V=<vellum area #> F=<film area #>
S=<scan area #>
STATUS=<status>
<FF>
Possible status values are:
STATUS = invalid ACTION
STATUS = No Hard Disk - Accounting Disabled
STATUS = invalid Password
STATUS = invalid ACTION
STATUS = invalid Account/SubAccount Num.
STATUS = invalid UNITS
STATUS = error parsing ACTION
STATUS = error parsing ACCTNUM
STATUS = error parsing SUBACCTNUM
STATUS = error parsing BOND
STATUS = error parsing VELLUM
STATUS = error parsing FILM
STATUS = error parsing SCAN
STATUS = UNITS error, Using default units, DM.
STATUS = error parsing UNITS
STATUS = Account(s) reset
STATUS = RESET error
STATUS = Account(s) deleted
STATUS = CREATE error
STATUS = Account created
Page 10 of 160