Version 10.0
AccXES PJL Interface
The response will be a repeat of the actual command the host sent requesting the upload immediately
followed by the object data and terminated with a form feed.
10.3 Downloading a Printer Object into Non-volatile Memory
This example shows how to download a printer object into the printer's non-volatile memory. A pen
palette is downloaded into the printer with the name "1." This palette has two pens. The system is
assumed to have a printer password set to 5. As mentioned previously, a previously downloaded object
with the same name and type will be overwritten.
<UEL>@PJL
@PJL JOB PASSWORD=5
@PJL COMMENT XESOBJECTDOWNLOAD TYPE = XESPALETTES NAME = "1" MODE =
DEFAULT
@PJL ENTER LANGUAGE = DOWNLOAD
zzzzzzFINESS-Download-Object
XESPALETTES
NAME="1"
NUMPENS=2[2 RANGE]
0
1
0.35 *, 255 *, "5" *
0.70 *, 255 *, "7" *
<UEL>@PJL EOJ
<UEL>
Downloading a raster stamp is shown below:
<UEL>@PJL
@PJL JOB PASSWORD=5
@PJL COMMENT XESOBJECTDOWNLOAD TYPE = XESRASTERSTAMPS NAME = "Stamp1"
MODE = DEFAULT
@PJL ENTER LANGUAGE = HPGL
<Data for HPGL job describing the stamp><UEL>@PJL
@PJL EOJ
<UEL>
Page 134 of 160