Job Accounting Status - Xerox 850DP - Phaser Color Solid Ink Printer Manual

Version 10.0
AccXES PJL Interface

6.10 Job Accounting Status

The following PJL command can be used to obtain the status for the Job Accounting feature.
@PJL INFO JOB_ACCOUNTING
After parsing this command the controller will echo the command, output the reply to the command,
followed by a form-feed, on the back channel as shown below:
@PJL INFO JOB_ACCOUNTING
JBA_ACCT_VERSION=ESS SW REV=6.2.00:100
JBA_RECORD_LIMIT=[1 – 15000 ]
JBA_ACCT_MODE=[ENABLED, DISABLED,OPTIONAL]
JBA_ACCT_DISABLE_SERVER_LOG_FULL=[FALSE,TRUE]
JBA_ACCT_INFO=[FALSE,TRUE]
JBA_DEVICE_NAME=[FALSE,TRUE]
JBA_COMPLETION_TIME=[FLASE,TRUE]
JBA_JOB_NAME=[FALSE,TRUE]
JBA_FINISHING=[FALSE,TRUE]
JBA_COMPLETED_REASON=[FALSE,TRUE]
JBA_JOB_COPIES_COMPLETED=[FALSE,TRUE]
JBA_MEDIA_SHEETS_COMPLETED=[FALSE,TRUE]
JBA_MEDIA_BLOCK_1=[FALSE,TRUE]
JBA_MEDIA_BLOCK_2=[FALSE,TRUE]
JBA_MEDIA_BLOCK_3=[FALSE,TRUE]
JBA_MEDIA_BLOCK_4=[FALSE,TRUE]
JBA_MEDIA_BLOCK_5=[FALSE,TRUE]
JBA_MEDIA_BLOCK_6=[FALSE,TRUE]
JBA_MEDIA_BLOCK_7=[FALSE,TRUE]
JBA_MEDIA_BLOCK_8=[FALSE,TRUE]
JBA_MEDIA_BLOCK_9=[FALSE,TRUE]
JBA_MEDIA_BLOCK_10=[FALSE,TRUE]
JBA_MEDIA_BLOCK_N=[FALSE,TRUE]
Page 111 of 160