Konica Minolta bizhub PRO 1051 User Manual page 81

Installation of the printer driver (Macintosh)
Specifying the AppleTalk settings
Enable AppleTalk in "AppleTalk Setting", and then enter the printer name.
For details on the AppleTalk settings of the copier, refer to the User's Guide
[POD Administrator's Reference or Main Body].
Specifying the AppleTalk settings for the computer
1
On the "Apple" menu, select "System Preferences".
2
Click the "Network" icon.
3
From "Show", select "Built-in Ethernet".
4
In OS 10.5, click [Advanced].
5
Click the AppleTalk tab, and then select the "Make AppleTalk Active"
check box.
6
Click [OK].
7
Click [Apply(Now)].
8
Click the close button at the upper left corner of the dialog box.
– When the "This service has unsaved changes." message appears,
click the [Apply].
Adding a printer
1
On the "Apple" menu, select "System Preferences".
2
Select [Print & Fax].
3
Click [+] provided at the lower left of the screen.
4
When a printer is detected that has been connected, select an intended
printer name and the Kind (Connection) (AppleTalk) from the [De-
fault(Browser)] tab.
– In OS 10.5, the setting can also be made from the [AppleTalk] tab.
Select an intended printer name from among printers detected on
the screen.
5
In OS 10.5, after selecting [Select a driver to use] in [Print using] pro-
vided in the lower section of the screen, select [KONICA
MINOLTA1200/1051PS(P)] from the list and then click [Add].
bizhub PRO 1200/1200P/1051 Printer
5
5-4