Konica Minolta bizhub PRO 1051 User Manual page 330

Utility Tool
Setting Up an HP-UX Remote Printer to Use lpd
Set up a remote printer on the host that sends jobs to the network interface
card using the lpd of the network interface card. To do this:
1
At the prompt, type:
– sam
2
When a window appears, select [Printer/Plotter Manager].
3
When the menu appears, select [List printer and plotters].
4
When a list appears, select [Actions] in the title bar.
5
From the pull-down menu, select [Add Remote Printer].
6
When a window appears, add values to configure the network interface
card.
7
At the bottom of the screen, select [Remote Printer is on BSD system]
from the three choices available.
8
Click on the [OK].
9
Ping the unit to test communications. Type:
– ping <IP address of the network interface card>
10
Ping should confirm your IP address with the message:
– <IP address of the network interface card> is alive
11
If the connection is confirmed, you can now print.
See example below.
Data Requested
Printer Name
Remote System Name
Remote printer Name
bizhub PRO 1200/1200P/1051 Printer
Example
myprinter
fastprint
PRINT
Description of Input Data
name to be used in lp com-
mand
Network Interface Card host-
name as in /etc/hosts
lpd queue name
13-30
13