Konica Minolta bizhub PRO 1051 User Manual page 286

PostScript PPD Printer Driver setting (Mac OS X)
Output Method - Wait Mode/Proof and Print/Proof and Print (1st sheet)
Outputs the test print and checks the current setting from the control panel
of copier. Use this when printing a large volume document, such as multiple
sets of pages.
1
Open the file to be printed and select [File] - [Print] of application.
2
Select [Security] from pop-up menu.
3
Select [Wait Mode], [Proof and Print] or [Proof and Print (1st sheet)] in
the [Output Method].
– Select [Wait Mode] to wait before printing the document to check
the current setting from the control panel of copier.
– Select [Proof and Print] to print the one copy as a test to check the
output and the current setting from the control panel of copier.
– Select [Proof and Print (1st sheet)] if you want to print only the first
page for checking the current setting.
4
Click [Print] to perform printing from the application.
– When the [Wait Mode] is selected, it stops without being printed.
– When the [Proof and Print] is selected, only one part is printed and
it stops.
– Select [Proof and Print (1st sheet)] if you want to print only the first
page for checking the current setting.
The copier is stopped temporarily and the Mode Check screen is dis-
played.
5
Confirm the current settings.
– If you do not change any setting,
proceed to the step 8.
– Click [Suspended] to move the
JOB to [Suspend] in the JOB
list.
– When [Proof and Print] is select-
ed, only one set is printed and it
stops.
– If [Proof and Print (1st sheet)] is
clicked, only the first page is printed and the copier is stopped tem-
porarily.
6
If necessary, select the item and change settings.
7
Press [OK].
The Mode Check screen will be restored.
bizhub PRO 1200/1200P/1051 Printer
10
10-35