Konica Minolta bizhub PRO 1051 User Manual page 244

PostScript PPD Printer Driver setting (Windows)
[Perfect Binding Settings] can be set to the following modes.
Turn on the [Perfect Binding Cover Duplex] check box when printing the cov-
er on both sides and the [Trim] check box when conducting the cover cutting
operation.
Cover Blank
This is used when the perfect binding is employed with no printing made on
the cover sheet.
The original set in the [Cover Tray] is handled as a cover sheet.
Ex.: When using [Cover Blank] for the perfect binding.
Cover Print 1 in 1
This is used when arrangements are made in advance for the originals the
front cover, the back cover and the spine of which have been cut and pasted
to the same size as the paper used as the front cover.
When printing the both sides of the front cover, it is necessary to make ar-
rangements for the reverse side of the front cover in advance.
NOTE:
The use of [PI Tray], [PI-PFU Tray] and [PB Cover Tray] is not available for
[Cover Print 1in1].
Ex.: When using [Cover Print 1in1] for the perfect binding.
bizhub PRO 1200/1200P/1051 Printer
Cover Blank
Cover Print 1in1 (Both sides)
9
9-36