Konica Minolta bizhub PRO 1051 User Manual page 161

PCL Printer Driver Setting (Windows)
Offset
Only when the finisher unit has been setup, select to shift the next position
of each set of print out back and forth when printing multi set of copies.
Click [Offset Settings] with a check put in [Offset] to display the [Offset Set-
tings] window. And in this window thus displayed, a setting is made.
Offset by number of copies
Offset by number of sheets
Offset by Separation of copies
Synchronize with copies
bizhub PRO 1200/1200P/1051 Printer
The number of copies is set when sorted by copies.
The number of sheets is set when sorted by sheets.
A selection is made when sorted at the end of the
number of copies after being sorted by sheets.
A selection is made when sorted in gear with copies
with [Collate] set to OFF.
8
8-30