Kyocera KM-2030 Instruction Handbook Manual page 13

› Margin/Border Erase/Book Erase key (Indicator)
(Press to create margins or erase borders in copies. The
indicator will light green. See pages 5-5 and 6.)
fi Copy quality selection key/Auto Exposure/Text & Photo/
Photo/Text indicators
(Press to select copy quality. See page 4-2.)
fl Sort mode key/Staple Sort/Sort/Group indicators
(Press to sort copes into separate sets, or for stapling,
sorting or grouping copies with the optional finisher. The
indicators will light green in the respective modes.)
‡ Auto selection key (Indicator)
(Press to perform auto selection copying. The indicator will
light green. The optional DF must be installed to use this
function. See page 5-10.)
CHAPTER 2 NAMES OF PARTS
Initial mode (at the end of warm-up or when the Reset key
is pressed)
In the initial mode, paper of the same size as the original is
selected automatically ("auto paper selection mode"), the
number of copies is set to "1" and copy quality is set to "Text &
Photo".
NOTE
• It is also possible to change the default setting for copy exposure
adjustment to "auto exposure mode" in the initial mode. (See
"1 Exposure mode" on page 6-11.)
Auto clear function
About 90 seconds after copying stops, the copier will auto-
matically return to the same settings as those after warm up.
(However, the exposure mode will not change.) Copying can
be performed at the same settings (copy mode, number of
copies and exposure mode) if copying is started before the
auto clear function operates.
Automatic drawer switching function
If two or more drawers contain paper of the same size in the
same orientation and the paper in one drawer runs out during
copying, this function switches paper feed from the empty
drawer to a full drawer.
NOTE
• The automatic drawer switching function can be disabled. (See
"$ Auto drawer switch" on page 6-19.)
Message display
1 Displays messages regarding the machine status and
required operations.
2 Displays copy modes.
APS (auto paper selection mode)
AMS (auto magnification selection mode)
1:1 (manual copy mode)
3 Displays magnification ratio.
4 Displays the original size, paper size and the currently
selected drawer.
5 Displays the number of copies to be made.
2-4