Product Specifications - Gigabyte GA-785GMT-USB3 User Manual

1-2

Product Specifications

CPU
Hyper Transport Bus 
Chipset  North Bridge: AMD 785G
 South Bridge: AMD SB710
Memory
Onboard Graphics 
Audio  Realtek ALC889 codec
 Support for S/PDIF In/Out

LAN
Expansion Slots 
Storage Interface 
Hardware Installation
Support for AM3 processors:

AMD Phenom II processor/ AMD Athlon
™
(Go to GIGABYTE's website for the latest CPU support list.)
5200 MT/s
4 x 1.5V DDR3 DIMM sockets supporting up to 16 GB of system memory

Dual channel memory architecture

Support for DDR3 1800(O.C.)/1333/1066 MHz memory modules

(Go to GIGABYTE's website for the latest memory support list.)
Integrated in the North Bridge:
- 1 x D-Sub port
- 1 x DVI-D port
(Note 2) (Note 3)
- 1 x HDMI port
(Note 3)
 High Definition Audio
 2/4/5.1/7.1-channel
Support for Dolby

Support for CD In
Realtek RTL8111D chip (10/100/1000 Mbit)

1 x PCI Express x16 slot, running at x16
(The PCI Express x16 slot conforms to PCI Express 2.0 standard.)
1 x PCI Express x1 slot

2 x PCI slots

South Bridge:
- 1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices
- 5 x SATA 3Gb/s connectors (SATA2_0, SATA2_1, SATA2_2, SATA2_3,
SATA2_4) supporting up to 5 SATA 3Gb/s devices
- 1 x eSATA 3Gb/s port on the back panel supporting up to 1 SATA 3Gb/s
device
- Support for SATA RAID 0, RAID 1, RAID 10, and JBOD
iTE IT8720 chip:

- 1 x floppy disk drive connector supporting up to 1 floppy disk drive
Home Theater
®
- 10 -
II processor
™
(Note 1)