Setup Of The Ati Hybrid Crossfirex ™ Configuration - Gigabyte GA-785GMT-USB3 User Manual

1-6 Setup of the ATI Hybrid CrossFireX
Combining the onboard GPU with a discrete graphics card, ATI Hybrid CrossFireX can provide significantly
advanced display performance for AMD platform. This section give instructions on configuring an ATI Hybrid
CrossFireX system.
A. System Requirements
- Windows 7/Vista or Windows XP
- An ATI Hybrid CrossFireX-supported motherboard and correct driver
- An ATI Hybrid CrossFireX-supported graphics card
B. Connecting the Graphics Cards
Step 1:
Observe the steps in "1-5 Installing an Expansion Card" and install an ATI Hybrid CrossFireX-supported
graphics card on the PCI Express slot.
Step 2:
Plug the display cable into the onboard graphics port on the back panel.
C. BIOS Setup
Enter BIOS Setup to set the following items under the Advanced BIOS Features menu:
- Set Internal Graphics Mode to UMA.
- Set UMA Frame Buffer Size to 256MB or 512MB.
- Set Surround View to Disabled.
- Set Init Display First to OnChipVGA.
D. Configuring the Graphics Driver
After installing the motherboard driver in the operating system, go
to the ATI Catalyst
™
Graphics menu on the upper left corner and ensure the Enable
CrossFire
check box is selected.
™
(Note 1) For Windows XP, you must install AMD chipset driver version 8.51 or later.
(Note 2) You do not have to install the graphics card driver if the motherboard chipset driver has been in-
stalled.
(Note 3) To change the Internal Graphics Mode or UMA Frame Buffer Size setting in BIOS Setup, be sure
to disable the CrossFire function in the operating system first.
operating system
(Note 1)
(Note 3)
Control Center. Select CrossFire
Configuration
™
(Note 2)
(Note 3)
on the
™
- 19 - Hardware Installation