Draytek Vigor 2800 Quick Start Manual page 14

1.3.4 Vigor2800
LED Status
ACT (Activity) blinking The router is powered on and running properly.
QoS on
on
P2P
blinking When starting to prohibit P2P data
Firewall on
blinking When encountered DoS attacks.
VPN on
DSL on
Printer on
orange
LAN
(P1, P2, P3,
P4)
green
blinking Ethernet packets are transmitting.
Interface Description
Connect to the USB printer.
Printer
PWR Connect the included power adapter to the power outlet.
P1, P2, P3, P4 Connect to the local networked devices.
DSL Connect the ADSL,ADSL2/2+ line to access the Internet.
Factory Reset Restore the default settings.
Usage: Turn on the router (ACT LED is blinking), press the hole and
keep for more than 5 seconds. When the ACT LED begins to blink
rapidly, release the button. Then the router will restart with the factory
default configuration.
Explanation
The QoS function is active.
The P2P function is active
The DoS function is enabled.
The VPN function is active.
The ADSL,ADSL2/2+ line is showtime.
The USB interface printer is ready.
A normal 10Mbps connection is through its corresponding
port.
A normal 100Mbps connection is through its corresponding
port.
8