1.3.3 Vigor2800i
LED
Status
ACT (Activity)
blinking The router is powered on and running properly.
ISDN
on
blinking A successful remote connection on the ISDN BRI B1/B2
P2P
on
blinking When starting to prohibit P2P data
on
Firewall
blinking When encountered DoS attacks.
VPN
on
DSL
on
Printer
on
LAN
orange
(P1, P2, P3,
P4)
green
blinking Ethernet packets are transmitting.
Interface
Description
Printer
Connect to the USB printer.
Connect the included power adapter to the power outlet.
PWR
Connect to the local networked devices.
P1, P2, P3, P4
DSL
Connect the ADSL,ADSL2/2+ line to access the Internet.
ISDN
Connect to the NT1 (or NT1+) box provided by ISDN service provider.
Factory Reset
Restore the default settings.
Usage: Turn on the router (ACT LED is blinking), press the hole and
keep for more than 5 seconds. When the ACT LED begins to blink
rapidly, release the button. Then the router will restart with the factory
default configuration.
Explanation
The ISDN network is correctly setup.
channel.
The P2P function is active
The DoS function is enabled.
The VPN tunnel is launched.
The ADSL,ADSL2/2+ line is showtime.
The USB interface printer is ready.
A normal 10Mbps connection is through its corresponding
port.
A normal 100Mbps connection is through its corresponding
port.
7