ACR Electronics NAUTICAST INLAND AIS User Manual page 77

Select Submenu 4 "Change DAC / ESN" with cursor button [Up] & [Down] by pressing Nr. 4
on the keyboard.
N 1^21' E
-----| |
View | +- 2. User Password Settings
-----| +- 4. Change DAC / ESN
Msg. | +- 6. Restore Factory Settings
-----|
Displ|
----------------------------------------
NUM| Select->|
Input new DAC / ESN Numbers and press [Save] to store input data. Press [Back] to return
to the Submenu without saving.
Note:
The DAC (Designated Area Code) is predefined with the value "200". Please key in only a
different 3 digit value if your authority wants you to do this. Otherwise you may lose
important AIS information. The ESN (European Ship Number) is limited to 8 ASCII
characters.
N 1^21' E
*********** Change DAC / ESN ***********
DAC
ESN
----------------------------------------
NUM|
Dynamic Keys: Change MMSI / IMO
[M5] [Save]
[M8] [Back]
User Manual
0^14' |1>0.01|2>1.30|3>1.80nm
|----------------------------------
| 6. Service Configuration
| +- 1. Change Service Password
| +- 3. Change MMSI / IMO
| +- 5. Change AIS Mode
|
|
|
0^14' |1> N/A|2>0.00|3>0.10nm
: 200
: A123456B
Save | |
Save MMSI/IMO
Number Input
Return to Submenu
Service
Configuration
|<-Back
| Back
Navigate Data Input
[Enter]
Fields (up/down)
Navigate Data Input
[Up] /
Fields (up/down)
[Down]
76
Y1-03-0211 Rev. B