Transponder Configuration (User Password Protected) - ACR Electronics NAUTICAST INLAND AIS User Manual

3.5.5 Transponder Configuration (User Password Protected)

The Configuration Menu allows the user to alter the hardware-based parameters. User
Password Configuration is also undertaken here.
Accessing the Configuration Settings:
The Configuration Menu is User Password protected.
Note:
The default User Password is set at "NAUT"
It is strongly recommended to change it immediately after commencing initial NAUTICAST
operation!
N 1^22' E
-----| |
View | +- 2. Region Settings
-----| +- 4. Interrogation Settings
Msg. | +- 6
-----|
Displ|
----------------------------------------
NUM|Select->|
Dynamic Keys: Transponder Configuration
[M5] [Select]
User Manual
0^15' |1> N/A|2>0.00|3>0.10nm
|----------------------------------
| 5. Transponder Configuration
| +- 1. Change User Password
| +- 3. Alarm Settings
| +- 5. Sensor Settings
Inland AIS quality Info
|
|
|
Select desired
Submenu
|<-Back
Return to Main
[M8] [Back]
Menu
60
Y1-03-0211 Rev. B