ACR Electronics NAUTICAST INLAND AIS User Manual page 73

After entering the Default Service Password "NAUT", in the password query, the Service
Configuration Menu may be accessed. In this menu it is possible to configure both the
Service Password and the User Password Settings, as well as input the MMSI/IMO Numbers
and reset the to Factory Settings.
N 1^24' E
----------------------------------------
++++++++++++++++++++++++++++++++++++++++
++++++++++++++++++++++++++++++++++++++++
----------------------------------------
g) Change Service Password
This screen provides a means to individually configure the Service Password. This password
differs from the User Password as it allows the user access to the Menu „Service
Configuration".
A minimum of 4, a maximum of 8 characters are allowed. The process of configuring the
Service Password is identical to that of User Password configuration (see Menu 5:
Configuration, Submenu 1: Change User Password).
N 1^25' E
******* Change Service Password ********
Enter new password :
Repeat new password:
----------------------------------------
Dynamic Keys: Change Service Password
Confirm New Service
[Enter]
Password Input
Save New Service
[Save]
Password
User Manual
0^17' |1>0.10|2>1.30|3>1.80nm
Service password protected!
Please enter service password:
| Enter | |
0^18' |1>0.10|2>1.30|3>1.80nm
{Length: 4..8 characters}
| Enter | |
[M8]
| Exit
| Back
Return to Submenu
[Back]
Service Configuration
72
Y1-03-0211 Rev. B