ACR Electronics NAUTICAST INLAND AIS User Manual page 46

h) Writing a "Estimated Time of Arrival" (ETA) Message
Upon selection of "3. Lock Request" in the Message Menu, the Lock Request (ETA) Editor
appears. The Message contains:
- The address of the recipient of this ETA – Message (the default is "2000000"). The
address could be received from the authority.
- The RIS Identifier / location code of the Lock. This code is divided into 5 parts. It has
to be keyed in with the UN - values of that particular destination.
- The number of tug boats that are required. Valid entries are 0-6 (7 = unknown =
default).
- The estimated time of arrival in the format MMDDhhmm (month-day-hour-minute).
N 1^22' E
*************Lock Request***************
Dest MMSI
UN Location
Fairway section:(5 Digits)
Terminal code
Fairway hecto
NumofTugBoats
ETA(MMDDhhmm)
----------------------------------------
Dynamic Keys: Broadcast Message Editor
[M5] [Send]
[M8] [Back]
RIS IDENTIFIER/ LOCATION CODE
Data Elements
The full Location Code has the following elements:
1 UN Country code
2 UN Location code
3 Fairway section No.
4 Terminal code or passage point code
5 Fairway section hectometer
in the database treated as an attribute to the fairway section number.
The location must be given unique which can happen in different ways depending on the
purpose of reporting and the local situation.
Example:
UN Country code UN Location code
DE TRI
This is the RIS Identifier / location code of the Mosel - Lock in Trier / Germany.
User Manual
0^16' |1> N/A|2>0.00|3>0.10nm
:(9 Digits)
:(3 Digits)
:(5 Digits)
:(5 Digits)
:0-6 (7 = unknown = default)
:
| Send | |
Send Message
Return to Messages
Menu
Fairway section
03201
| Back
Send Message
[Enter]
(2 digits)
(3 digits)
(5 digits)
(5 digits)
(5 digits),
Terminal code
LOCK
45
Fairway Hecto-metre
00000
Y1-03-0211 Rev. B