ACR Electronics NAUTICAST INLAND AIS User Manual page 63

a) Change User Password (for initial NAUTICAST Operation)
It is strongly recommended to change the default User Password upon initial NAUTICAST
operation.
The new User Password can be between 4 - 8 characters in length, and is not case
sensitive.
N 1^19' E
-----| |
View | +- 2. Region Settings
-----| +- 4. Interrogation Settings
Msg. |
-----|
Displ|
----------------------------------------
NUM|Select->|
N 1^33' E
********* Change User Password *********
Enter new password:
Repeat new password:
----------------------------------------
Dynamic Keys: Initial User Password Setting
[M5] [Enter]
This screen appears if the new User Passwords are mismatched - i.e. the New User
Password and the Repeated New User Password are not identical.
In this case, it is possible to re-input both the New and Repeated User Passwords again.
[Exit] takes the user back to the User Password Input Screen.
User Manual
0^12' |1>0.10|2>1.30|3>1.80nm
|----------------------------------
| 5. Configuration
| +- 1. Change User Password
| +- 3. Alarm Settings
| +- 5. Sensor Settings
|
|
|
0^27' |1>0.10|2>1.30| *
*****
*****
{Length: 4..8 characters}
| Enter | |
Confirm User
Password Input
|<-Back
1A1L
| Back
Return to Menu
[M8] [Back]
Configuration
62
Y1-03-0211 Rev. B