Direct Video Capturing To Mpeg Format - Ulead VIDEOSTUDIO 10 User Manual

54
ULEAD VIDEOSTUDIO USER GUIDE
Tip: Click Settings to set where to browse for files and where to save imported and
exported files.
5. You can also trim your video and audio clips before you insert them to your
project.
To trim video and audio clips before inserting to project:
1. Select the clip you want to trim and click
2. At the bottom of the dialog box, drag the Jog Slider until you locate the point in
the video or audio clip that you want to set as the start of the clip. Click
3. Drag the Jog Slider until you locate the point in the video or audio clip that you
want to set as the end of the clip. Click
4. Click to listen to your trimmed clip. When finished, click OK.

Direct video capturing to MPEG format

VideoStudio supports real-time capturing from DV, analog, or any video source to
MPEG-1 and MPEG-2 formats. Capturing straight to MPEG saves hard drive space
as its file size is smaller compared with DV AVI.
To capture video in MPEG-1 or MPEG-2 format:
• In the Options Panel, select MPEG from the Format list to capture MPEG
files that are intended for playback on the computer or for sharing on the
Web.
You can also capture VCD, SVCD or DVD-ready MPEG files that can be burnt
onto disc by selecting one of these formats from the Format list.
Note: The Ulead DSW MPEG Capture Plug-in will be automatically detected. If
your capture device does not support this plug-in, you need to manually select this
plug-in the Change Capture Plug-in dialog box.
• Click Options and select Video and Audio Capture Property Settings. In
the dialog box that opens, click the Capture tab then click Advanced. The
for preview of the clip.
.
.