Ulead VIDEOSTUDIO 10 User Manual page 71

2. In the Multi-trim Video dialog box, view the whole clip first by clicking
determine how you want to mark segments.
3. Choose the number of frames to display by dragging the Timeline zoom. You can
choose to display the smallest subdivision of one frame per second.
4. Drag the Jog Slider until you get to the part of the video that you want to use
as the beginning frame of the first segment. Click
5. Drag the Jog Slider again, this time, to the point where you want the segment
to end. Click
6. Do steps 4 and 5 repeatedly until you have marked all the segments you want
kept or removed.
Tips:
• To mark segments, you can also press [F3] and [F4] while playing the video.
• Click Invert Selection
retain or marking segments that you want taken out from the clip.
7. Click OK when finished. The video segments that you kept are then inserted
onto the Timeline.
Navigation controls in the Multi-trim Video dialog box:
[F5] [F6]
End.
to toggle between marking segments that you want to
Reverses or advances through the video in fixed increments. By
default, these buttons move up or down through the video in
increments of 25 seconds.
Plays a preview of the final trimmed video.
Plays the video file. Hold [Shift] then click to play only the selected
segments.
Moves to the start or end frame of a trimmed segment.
Moves to the previous/next frame in the video.
ULEAD VIDEOSTUDIO USER GUIDE
Start.
71
to