Ulead VIDEOSTUDIO 10 User Manual page 21

To use Scene detection:
1. After selecting Scene detention, choose whether to scan the tape From
beginning or From current position.
• From beginning: Scans the tape for scenes from the beginning. VideoStudio
will automatically rewind the tape if the tape position is not in the beginning.
• From current position: Scans the tape for scenes from the current tape
position.
2. Specify the scan speed, then click Start Scan to begin scanning the DV device
for scenes. Scenes are video segments that are distinguished by shooting date
and time.
3. In the Storyboard, choose the scenes you want to include in your movie. To do
this, select a scene then click Mark Scene.
ULEAD VIDEOSTUDIO USER GUIDE
Storyboard
21