Capturing Video Directly To Mpeg Format - Ulead USBAV-701 User Manual

Tip: You can also capture a still image from a video clip in the Add/
Edit Media page. Select the video clip from which you want to
capture the still image and use the navigation buttons to locate the
frame to capture. Right-click the Preview Window and select
Capture Image. You will then be prompted to save the captured
image to your local folder.

Capturing video directly to MPEG format

DVD MovieFactory allows you to capture video from a DV
camcorder or analog source straight to MPEG.
To capture video in MPEG format:
Connect your camcorder or VCR to your capture card. Switch it on
and set it to Play (or VTR/VCR) mode.
1. Select a DVD or CD format in Format.
2. Ulead DSW MPEG Capture Plug-in will be detected
automatically. Use this capture plug-in when capturing MPEG
from a DV camcorder. If you have a USB camera or analog
capture device which does not support this capture plug-in, click
Advanced Settings: Capture Plug-in and choose Ulead DSW
MPEG Capture Plug-in.
3. Click Advanced Settings again and select Video and Audio
Capture Property Settings. Here, click Advanced. Choose the
type of MPEG you would like to capture in the MPEG Settings
dialog box and set other attributes.
Note: A DVD player connected to an amplifier using an audio-
optical-fiber cable may not be able to produce sound when playing an
NTSC DVD with MPEG audio.
ULEAD DVD MOVIEFACTORY USER GUIDE 25