92
ULEAD VIDEOSTUDIO USER GUIDE
The Overlay Step Options Panel
There are two tabs in the Overlay Step Options Panel: Edit tab and Attribute
tab.
Edit tab
The Edit tab allows you to customize properties such as clip duration, playback
speed, and audio properties of the overlay clip. The available options in this tab will
depend on the selected overlay clip.
Attribute tab
The Attribute tab allows you to apply motion, transparency, filters and border to
the overlay clip.
•
Replace last filter: Allows the last filter applied to a clip to be replaced when you drag a
new filter onto the clip. Clear this option if you want to add multiple filters to your clips.
•
Applied filters: Lists the video filters that were applied to a clip. Click
arrange the order of the filters.
•
Delete filter: Removes the selected filter from the overlay clip.Click
•
Presets: Opens a menu where you can select a preset for the selected filter to apply to
the overlay clip.
•
Customize Filter: Opens a dialog box where you can define settings and options for the
selected filter.
•
Show grid lines: Select to display the grid lines. Click
you can specify settings for the grid lines.
•
Direction/Style: Determines the type of movement to be applied to the overlay clip.
Enter/Exit: Set the directions in which the clip will enter and leave the screen.
Fade-in/Fade-out: Select to gradually increase or decrease the transparency of the clip
when it enters or leaves the screen.
Rotate before/after pause duration: Select to rotate the clip before or after pause
duration.
•
Mask & Chroma Key: Opens the Overlay Options Panel where you can specify the
transparency and overlay options to be applied to the overlay clip.
: Goes back to the previous Options Panel.
Transparency: Sets the opacity of the clip. Drag the slider or enter a value to adjust the
transparency.
Border: Enter a value to set the thickness of the border. Click the Color Box to select the
border color.
or
to
to remove a filter.
to open a dialog box where