Direct Video Capturing To Mpeg Format - Ulead VIDEO STUDIO 7 Manual

VIDEOSTUDIO HELP
Table of Contents | Index

Direct video capturing to MPEG Format

Capturing video directly from your camcorder straight to MPEG
format is one of the most exciting developments in computer video.
Capture straight to MPEG-1 or MPEG-2, depending on your needs
and skip the task of having to capture in other formats only to
convert it later. And with the much smaller size of MPEG files, you
save on hard disk space. With this version of VideoStudio, you can
now capture video from an analog device or DV camcorder straight
to MPEG.
To capture video in MPEG
format:
1. Connect your camcorder or
VCR to your capture card.
Switch it on and set it to Play
(or VTR / VCR) mode. Check
your device manual for specific
instructions.
2. In the Capture Step, select
MPEG from the Format list.
3. Ulead DSW MPEG Capture
Plug-in will be detected
automatically. Use this capture
plug-in when capturing MPEG
from a DV camcorder.
Otherwise, if you have a USB
camera or analog capture
device which does not support
this capture plug-in, click File:
Change Capture Plug-in and
choose Ulead DSW MPEG
Capture Plug-in.
4. Click Options and select Video
Capture Property Settings. In
the dialog box launched, click
Advanced. Choose the type of
MPEG you would like to
Back 46