Performing Fades And Distortions Over Time - Ulead MEDIASTUDIO PRO 7 User Manual

Select the Moving Path tool and click the object on the left side, then
2.
drag the End control point to the center of the screen. (Show your
Rulers and Guides to use guidelines to help you align the object.)
Note: All moving path actions must be done with the Moving Path tool selected.
Do not switch tools during this procedure.
Move the Time control slider to the last frame and click the Add Key
3.
frame control point button.
Drag the key frame back to the 1 second mark. This makes the
4.
object finish its movement at the 1 second mark.
Repeat the same procedure with the object on the right side, dragging
5.
the End control point so that the two sides of the face touch.
Click the white line on the left and drag its End control point to the
6.
center of the edit window.
Move the slider to the 1 second mark and add a key frame. (This is
7.
the time you want the object to commence its movement.) Place your
pointer on the object in the edit window and drag it back so that it is in
the same place as the Start point. Move the slider to the last frame in
the Time Control panel and add a key frame and then move this key
frame back to the 2 second mark. (This is where the object ends its
movement.)
Repeat the same technique for the text at the top of the frame, starting
8.
the movement at the 2 second mark and ending at the 3 second mark.
Controlling the timing of multiple objects

Performing fades and distortions over time

The Motion tool and Time Control panel allow you to control an object's
transparency and size over time. This lets you create text or objects that
come flying in from the distance or fading in out of nothing.
To perform a fade and distortion over time:
.
Open the
1.
LOGO 3
MediaStudio Pro CD.
TUTORIAL FOUR: CG INFINITY
file from
UCG SAMPLES
folder on the
/
TUTORIAL
69