Table of Contents
Advertisement
VIDEO EDITOR: CHAPTER TWO
169
As green.avi is about to be inserted, the part that overlaps the yellow clip
turns bluish. When the clip is actually inserted, the yellow clip and the one
second space are moved to the right three seconds. In other words, the
entire track is shifted, spaces and all. (If you don't want the spaces
preserved, use Push Away Insertion. See page 131.) Note that the
transitions and the blue clip are unaffected. This time Multi-Track Ripple is
selected:
Everything downstream, including spaces, is shifted to the right three
seconds. This includes transitions and clips on all of the other tracks. The
entire project (to the right of the insertion point) is moved a few seconds to
accommodate the new clip.
Inserting clips into the middle of an existing clip
Clips can be inserted right into the middle of an existing clip, automatically
cutting the clip at the insertion point.
To insert a clip into another:
1. Select Edit: Ripple Editing: Single- or Multi-Track.
2. Click the Insert Video File button.
3. In the Insert Video dialog box, select the clip you want to insert.
Advertisement
Table of Contents
