IBM 8647 - Eserver xSeries 225 Installation Manual page 67

7. Click Next. The "Configuration summary" window opens.
Figure 4. "Configuration summary" window
8. Review the information that is displayed in the "Configuration summary"
window. To change the configuration, click Back.
9. Click Apply; then, click Yes when asked if you want to apply the new
configuration. The configuration is saved in the controller and in the physical
drives.
10. Exit from the ServeRAID Manager program, and remove the CD from the
CD-ROM drive.
11. Restart the server.
Chapter 4. Configuring the server
47