IBM 8647 - Eserver xSeries 225 Installation Manual page 37

11. If you have installed a full-length adapter, rotate the front adapter-support
bracket to the closed (locked) position.
12. Reinstall the rear adapter-retention bracket; then, rotate the bracket to the
closed (locked) position.
Note: If any adapters in your server are large or have heavy cables attached
to them, you can remove the rear adapter-retention bracket and secure
all of the adapters with expansion-slot screws. The expansion-slot
screws are stored on the frame-support bracket.
13. If you have other options to install, do so now; otherwise, go to "Completing
the installation" on page 34.
Chapter 2. Installing options
17