IBM 8647 - Eserver xSeries 225 Installation Manual page 40

Server with non-hot-swap hard disk drives
Notes:
1. Diskette drives, tape drives, CD-ROM, CD-RW, and DVD drives are examples
2. The integrated IDE controller in your server supports the connection of up to
3. You can install a 3.5-in. slim-high or 5.25-in. half-high removable-media drive,
4. The server supports only one diskette drive.
5. To install a 3.5-in. drive in a 5.25-in. bay, you must use the 5.25-in. conversion
6. The electromagnetic interference (EMI) integrity and cooling of the server are
7. For a complete list of supported options for your server, go to
20
IBM xSeries 225 Type 8647: Installation Guide
of removable-media drives. You can install removable-media drives in bays 1, 2,
and 3 only.
four IDE devices.
such as a tape backup drive, CD-RW, or DVD drive, in bay 2.
kit, supplied with the option.
protected by having all bays and PCI slots covered or occupied. When you
install a drive or PCI adapter, save the EMC shield and filler panel from the bay
or the PCI adapter slot cover in the event you later remove the option.
http://www.ibm.com/pc/support/ on the World Wide Web.
Bay 1
Bay 2
Bay 3
Bay 4
Bay 5
Bay 6
Bay 7