Removing A Slimline Optical Drive (Sr1530Cl/Sr1530Clr); Figure 56. Lifting Pci Cooling Fan From Mounting Pegs (Sr1530Cl/Sr1530Clr) - Intel SR1530CL - Server System - 0 MB RAM User Manual

Removing a Slimline Optical Drive (SR1530CL/SR1530CLR)

1. Observe the safety and ESD precautions at the beginning of this book. See
Information" on page
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. Remove the server system cover. For instructions, see
System Cover" on page
4. Remove the front bezel if it is installed. For instructions, see
Bezel" on page
5. Note the orientation of the PCI cooling fan that is located behind the optical drive
bay, then lift the fan from the mounting pegs. It is not necessary to disconnect the
fan cable. See letter "A" in the following figure.
Figure 56. Lifting PCI Cooling Fan from Mounting Pegs (SR1530CL/
6. Disconnect the optical drive power and data cables. See letters "A" and "B" in the
following figure.
7. Remove the screw that holds the optical drive bracket to the server chassis. See
letter "C". Save this screw. You will reinstall it later.
8. Slide the optical drive out through the front of the system. See letter "D".
58
iii.
28.
26.
A
SR1530CLR)
"Safety
"Removing the Server
"Removing the Front
AF000988
Server System User Guide