Frequently Asked Questions - Cisco WAP4410N - Small Business Wireless-N Access Point Administration Manual

Troubleshooting and Help

Frequently Asked Questions

WAP4410N Wireless-N Access Point with Power Over Internet
This appendix provides solutions to problems that might occur during the
installation and operation of the WAP4410N Access Point.
Read the descriptions below to help solve your problems. If you can't find an
answer here, check the Cisco.com website at
tsd_cisco_small_business_support_center_contacts.html
Q. Can the access point act as my DHCP Server?
No. The access point is nothing more than a wireless hub, and as such cannot be
configured to handle DHCP capabilities.
Q. Can I run an application from a remote computer over the wireless network?
This depends on whether or not the application is designed to be used over a
network. Consult the application's documentation to determine if it supports
operation over a network.
Q. Can I play multiplayer games with other users of the wireless network?
Yes, as long as the game supports multiple players over a LAN (local area
network). Refer to the game's documentation for more information.
Q. Can the access point work with a Centrino client?
Yes. However, a Centrino client only supports 20 MHz channels so the maximum
throughput with this client will be 130 Mbps. A WPC300N is recommended
instead.
Q. What is the IEEE 802. 1 1b standard?
It is one of the IEEE standards for wireless networks. The 802. 1 1b standard allows
wireless networking hardware from different manufacturers to communicate,
provided that the hardware complies with the 802. 1 1b standard. The 802. 1 1b
www.cisco.com/en/US/support/
.
A
66