Dns Configuration Page; General Page - Symantec ALTIRIS OUT OF BAND MANAGEMENT COMPONENT 7.0 SP3 - V1.0 Manual

40 About Out of Band Management Component pages

DNS configuration page

DNS configuration page

General page

For remote access to work, you must configure the Intel AMT platform when the
platform is inside the enterprise. You must configure the platform with the
information needed to connect with the MPS. The Remote Access tab is used to
enter the necessary parameters. A remote access policy contains the parameters
that determine the conditions for establishing an MPS connection. The policy
also contains the connection parameters to either one or two MPSs.
The MPS connection parameters are defined separately.
The computer with Intel SCS installed (the OOB site server computer) must be
registered in DNS as ProvisionServer. This must be done in each DNS domain.
Intel AMT devices send their Hello packets to this host name.
This page lets you test if the DNS is configured correctly.
Note: If this test fails, you cannot use the Remote Configuration feature.
For more information, see the Out of Band Management Component Implementation
Guide.
Also, you cannot set up and configure the Intel AMT capable computers that were
initialized by an OEM or with a USB key. Only computers with Intel AMT device
initialized through MEBx can be configured.
For more information, see the Out of Band Management Component Implementation
Guide.
Options on the DNS configuration page
Table 2-14
Option Description
Test Click to see if DNS is configured correctly. Verify that the IP of the ProvisionServer
matches the IP of Intel SCS.
This page lets you modify general settings of the Intel AMT Setup and
Configuration Service (Intel SCS).
This page modifies the settings of the Intel SCS that you selected as default on
the Service Location page.
See "Service location page " on page 46.