Setup And Configuration Profile: Tls Tab - Symantec ALTIRIS OUT OF BAND MANAGEMENT COMPONENT 7.0 SP3 - V1.0 Manual

Setup and configuration profile: TLS tab

On this tab, configure if you want the Intel AMT devices to require a certificate
when authenticating with other applications.
Note: You must have a properly configured infrastructure (certification authority
installed, proper certificates installed) to configure Intel AMT computers with
TLS or TLS Mutual Authentication.
For more information, see the Out of Band Management Component Implementation
Guide.
Options on the TLS tab
Table 2-8
Option Description
Use TLS Check to enable TLS.
When TLS is enabled, the Intel AMT device requires a server
certificate that is used to authenticate itself with other applications.
For more information, see the Out of Band Management Component
Implementation Guide.
Local Interface Select if you want the host communications with the Intel AMT device
to require TLS or TLS with mutual authentication.
Network Interface Select if you want network communications with the Intel AMT device
to use TLS or TLS with mutual authentication.
Encryption Mode Click Encrypted to allow setup and configuration only on the
platforms that support encryption.
Click Plain Text to allow setup and configuration only on the
platforms that do not support encryption.
Click Both to allow setup and configuration on both types of platforms
(encrypted and plain text).
About Out of Band Management Component pages
Configuration Profiles page
33