Table of Contents
Advertisement
38 Installing Symantec Mail Security for SMTP
Setting up
Completing setup
If you chose to filter only outbound mail, you will see the Outbound Mail
Filtering - Local Relay panel next. Click Next and proceed to step 5. If not,
click Next and skip to step 7.
5
On the Outbound Mail Filtering - Local Relay panel, specify the internal host
to which this Scanner will relay outbound mail after filtering is complete.
You can define a new host or select a host from the list. A typical value is a
downstream mail server such as your corporate mail server.
You can also specify a port. If you check Enable MX lookup for this host,
you must specify a host name (not an IP address) for that server.
6
Click Next.
7
On the Outbound Mail Filtering - Nonlocal Relay panel, specify how you
want to relay outbound mail after filtering is complete.
You can use default MX lookup, select a host from the list, or define a new
host.
You can also specify a port. If you check Enable MX lookup for this host,
you must specify a host name (not an IP address) for that server.
For outbound mail addressed to a non-local domain, there is typically no
relay host to specify. If you choose Use default MX lookup, the Scanner will
use Internet MX records to deliver the mail.
8
Click Next.
9
On the Setup Wizard Summary panel, review the settings shown.
10 If you are satisfied with the settings, click Finish to save them.
If not, click Back to revise your settings, or Cancel to end without saving any
changes.
When the configuration is complete, the Scanner will contact Symantec to
download the latest antispam filters and antivirus definitions, and the
default antivirus definition download schedule will be in place (if you have
installed an antivirus license). You can alter this schedule from the Control
Center. Refer to the Symantec Mail Security for SMTP Administration Guide
for more information.
Your installation is now nearly ready to use, with a set of default policies
designed for most enterprise installations. Review the following sections to
determine what additional setup tasks you need to perform.
Adding more Scanners
To add more Scanners, repeat the tasks in
"Setting up a Scanner"
on page 35.
Advertisement
Table of Contents
