6.11.2
Connecting the DA321G control unit
2
6.11.3
Connecting the DAC Classic control unit
1
–
Insert the lead from the controller (pedal) into socket B80 of the
controls.
–
Insert the lead from the motor sensor 1 into socket B2 of the
controls.
–
Insert the lead 2 from the motor into socket B41 of the controls.
–
Insert the lead to the sewing machine into socket A of the
controls.
–
Lay all leads through the cable duct.
–
Insert the lead from the control panel (if present) into socket B776.
Check operating instructions DAC Classic.
GB
33