DSC CLASSIC PC585 Installation Manual page 50

[61] Second User Display Mask
Default Option
OFF 1
I_______I
ON 2
I_______I
ON 3
I_______I
ON 4
I_______I
OFF 5
I_______I
ON 6
I_______I
OFF 7-8
I_______I
[62] Third User Display Mask
Default Option
ON 1
I_______I
ON 2
I_______I
ON 3
I_______I
ON 4
I_______I
ON 5
I_______I
ON 6
I_______I
ON 7
I_______I
ON 8
I_______I
[63] Downloaded LCD Message Duration
Default: 003
I_______I_______I_______I
[64] Key Options
Default Option
ON 1
I_______I
ON 2
I_______I
ON 3
I_______I
OFF 4-8
I_______I
[65] Fourth User Display Mask
Default Option
ON 1
I_______I
OFF 2
I_______I
OFF 3
I_______I
ON 4
I_______I
ON 5
I_______I
OFF 6-8
I_______I
[66] Keypad Options
Default Option
ON 1
I_______I
ON 2
I_______I
OFF 3
I_______I
ON 4
I_______I
OFF 5-8
I_______I
[97] View Software Version
[98] Initiate Global Label Broadcast
All LCD programming is done per keypad. If more than one LCD keypad are present on the system, and the PC5400 receives labels, labels pro-
grammed at one keypad can be broadcast to all other LCD keypads. Perform the following procedure in order to broadcast labels:
Step 1 - Program one LCD keypad completely.
Step 2 - Make sure all LCD keypads are connected to the Keybus.
Step 3 - Enter Installer's Programming, then enter Section [98] at the keypad that was programmed. The keypad will now broadcast all the informa-
tion programmed to all the other LCD keypads on the system.
Step 4 - When the keypad is finished press the [#] key to exit.
[99] Reset LCD EEPROM to Factory Defaults
ASCII Characters
46
ON
Installer Programming prompt ON
Stay Arm prompt ON
Quick Arm prompt ON
Interior Arm prompt ON
Quick Exit prompt ON
View Event Buffer prompt ON
For future use
ON
System Test prompt ON
Time and Date prompt ON
Auto-Arm Control prompt ON
Auto-Arm Time prompt ON
Download Enable prompt ON
Bright Control prompt ON
Contrast Control prompt ON
Buzzer Control prompt ON
(Valid entries are 000-255, 000=Unlimited Message Display. This number represents the number of times
the Downloaded message is cleared by pressing any key while the message is up after timeout)
ON
[F]ire Keys enabled
[A]uxiliary Keys enabled
[P]anic Keys enabled
For future use
ON
User Initiated Call-up Prompt ON
For future use
For future use
Command Output #1 prompt ON
Command Output #2 prompt ON
For future use
ON
Display Access Code when Programming
Local Clock Display Enabled
Local Clock Displays 24 Hour time
Auto Alarm Memory Scroll Enabled
For future use
OFF
Installer Programming prompt OFF
Stay Arm prompt OFF
Quick Arm prompt OFF
Interior Arm prompt OFF
Quick Exit prompt OFF
View Event Buffer prompt OFF
OFF
System Test prompt OFF
Time and Date prompt OFF
Auto-Arm Days prompt OFF
Auto-Arm Time prompt OFF
Download Enable prompt OFF
Bright Control prompt OFF
Contrast Control prompt OFF
Buzzer Control prompt OFF
OFF
[F]ire Keys disabled
[A]uxiliary Keys disabled
[P]anic Keys disabled
OFF
User Initiated Call-up Prompt OFF
Command Output #1 prompt OFF
Command Output #2 prompt OFF
OFF
Display 'X' when Programming
Local Clock Display Disabled
Local Clock Displays AM/PM
Auto Alarm Memory Scroll Disabled