DSC CLASSIC PC585 Installation Manual page 44

[370] Communication Variables
Default
003 Swinger Shutdown (Alarms and Rest) (001-014 Transmissions, 000=disabled)
I_______I_______I_______I
003 Swinger Shutdown (Tampers and Rest)(001-014 Transmissions, 000=disabled)
I_______I_______I_______I
003 Swinger Shutdown (Maint and Rest) (001-014 Transmissions, 000=disabled)
I_______I_______I_______I
000 Transmission Delay
I_______I_______I_______I
030 AC Failure Communication Delay
I_______I_______I_______I
003 TLM Trouble Delay
I_______I_______I_______I
030 Test Transmission Cycle (land line)
I_______I_______I_______I
030 Test Transmission Cycle (LINKS)
I_______I_______I_______I
007 Zone Low Battery Transmission Delay (000-255 days)
I_______I_______I_______I
030 Delinquency Transmission Cycle
I_______I_______I_______I
†Depends on programming in section [702], option [3].
NOTE: To disable the AC failure communications delay, program [000].
[371] Test Transmission Time of Day
NOTE: If the land line test transmission cycle is programmed in minutes (section [702], option [3]), this section will not affect the land
line test transmission cycle.
Default
9999
I_______I_______I_______I_______I
[380] First Communicator Option Code
Default Option
ON 1
I_______I
OFF 2
I_______I
OFF 3
I_______I
ON 4
I_______I
OFF 5
I_______I
OFF 6
I_______I
OFF 7
I_______I
OFF 8
I_______I
[381] Second Communicator Option Code
Default Option ON
OFF 1 Open After Alarm Kypd Ringback enabled
I_______I
OFF 2 Open After Alarm Bell Ringback enabled
I_______I
OFF 3 SIA Sends Programmed Rep. Codes
I_______I
OFF 4 Closing Confirmation Enabled
I_______I
OFF 5-6 For future use
I_______I
ON 7 Contact ID Uses Programmed Rep. Codes
I_______I
OFF 8 For future use
I_______I
[390] LINKS Preamble (First Telephone Number)
Default: FFFF
I_______I_______I_______I_______I
[391] LINKS Preamble (Second Telephone Number)
Default: FFFF
I_______I_______I_______I_______I
[392] LINKS Preamble (Third Telephone Number)
Default: FFFF
I_______I_______I_______I_______I
[393] LINKS Special Function Preamble (All Telephone Numbers)
page 26)
Default: FFFFFF
I_______I_______I_______I_______I_______I_______I
•Enter [*][2][*] (HEX B) to dial [*]
40
(Section 5.14 "Test Transmission" on page 23)
(Valid entries are 0000-2359, 9999 to disable)
ON
Communications Enabled
Restorals on Bell Time-out
Pulse Dialing
Switch to Pulse Dialing on 5th Attempt
3rd Telephone Number enabled
Alternate Dial (1st and 3rd)
Call LINKS as well as Land Line
Delinquency Follows Zone Activity (Hours)
(Program all unused digits with Hex F)
(Program all unused digits with Hex F)
(Program all unused digits with Hex F)
(Program all unused digits with Hex F)
• Enter [*][3][*] (HEX C) to dial [#]
(001-255 seconds)
(001-255 minutes)
(No. of checks required - valid entries 003 - 255) 5.12
(001-255 minutes/days)†
(001-255 days)
(000-255 days/hours)
OFF
Communications Disabled
Restorals Follow Zones
DTMF Dialing
DTMF Dial For All Attempts
3rd Telephone Number disabled
Call 1st Number, Backup to 3rd
LINKS is Backup of Land Line(s)
Delinquency Follows Arming (Days)
OFF
Open After Alrm Kypd Ringback disabled
Open After Alrm Bell Ringback disabled
SIA Sends Automatic Rep. Codes
Closing Confirmation Disabled
—
Contact ID Uses Automatic Rep. Codes
—
(Section 5.26 "LINKS1000 Cellular Communicator" on page 26)
(Section 5.26 "LINKS1000 Cellular Communicator" on page 26)
(Section 5.26 "LINKS1000 Cellular Communicator" on page 26)
(Section 5.26 "LINKS1000 Cellular Communicator" on
Section Page #
5.19 25
5.19 25
5.19 25
5.15 23
5.8 18
23
5.14 23
5.14 23
5.8 18
5.8 18
Section Page #
5.5 17
5.8 18
5.5 17
5.5 17
5.7 17
5.7 17
5.26 26
5.8 18
Section Page #
5.17 24
5.17 24
5.9 19
5.17 24
5.9 19