Selecting The Audio Programs; Direct Frequency Tuning - Denon TU-604CI - Multi-Zone Dual AM/FM Tuner Owner's Manual

ENGLISH
Symbols used to indicate buttons in this manual
Button located on both the main unit and the remote control
unit
Button only on the main unit
Button only on the remote control unit
<SELECT/ENTER>
<FUNCTION df>
<SEARCH> <SHIFT>
Tuner select
indicators
[0 ~ 9]
[SRCH]
[uio]


Selecting the Audio Programs

HD Radio includes up to 9 audio programs (HD1 to HD8 and
Analog). The different audio programs also have data programs.
BUTTON
1
<BUTTON>
TUNER SELECT
Press
[BUTTON]
installed ACD-HD (sold separately).
2
<FUNCTION
Use
program.
If the station you are listening to has multiple audio programs,
TUNER SELECT
"HD1" is indicated on the display. If it only has one audio
program, "HD" is indicated.
If an audio program from HD2 to HD8 has been interrupted or if a
program is called out using the preset buttons after it has been
interrupted, HD1 is automatically selected after about 20 seconds.
<RETURN/STATUS>
TUNER SELECT
[STATUS]
[ENTER]
to select the tuner unit with
> [ui]
df or to select the audio

Direct Frequency Tuning

You can enter the receiving frequency directly to tune in.
n Operation on the main unit
1
<TUNER SELECT>
Press to select the tuner unit with
installed ACD-HD (sold separately).
2
<SEARCH>
Press .
3
<SELECT/ENTER>
Turn to select the frequency, and
<SHIFT>
then press to set the frequency.
<SHIFT>
b Press for at least 2 seconds to cancel the entry you just
made.
4
<SELECT/ENTER>
When setting is completed, press
The preset frequency is tuned in.
n Operation on the remote control unit
1
[TUNER SELECT]
Press to select the tuner unit with
installed ACD-HD (sold separately).
2
[SRCH]
Press .
3
[0 ~ 9]
Input frequencies by means of
o
[ ] is pressed, the immediately preceding input is
b If
cancelled.
4
When setting is completed, press [
The preset frequency is tuned in.
.
.
ENTER]
.