Network Setup - Denon TU-604CI - Multi-Zone Dual AM/FM Tuner Owner's Manual

s Network Setup
Make settings for wired LAN.
Wired LAN settings
Use this procedure to configure the Wired LAN settings.
1
Connect the LAN cable (vpage 11).
2
Turn on the TU-604CI (vpage 21).
TU-604CI performs automatic network setup due to the DHCP
function.
When connecting to a network that has no DHCP function,
perform the setting in step 3.
3
Set the IP address at the menu "Network Setup" –

"Network Setup".

*Network Setup
DHCP
*DHCP
q Select "DHCP".
• OFF –
IP Address
192.168.000.001
Subnet Mask
255.255.255.000
Default Gateway
000.000.000.000
Primary DNS
000.000.000.000
Secondary DNS
000.000.000.000
e I nput the address.
n If IP Address is acquired automatically
q S elect "DHCP" and press
<SELECT/ENTER>
w T urn
<SELECT/ENTER>
press
Acquires IP Address automatically.
n If IP Address is input manually
q S elect "DHCP" and press
<SELECT/ENTER>
w T urn
<SELECT/ENTER>
The DHCP function is disabled.
e D isplaying entry items and entering address after pressing
<SELECT/ENTER>
IP Address
:
Set the IP address within the ranges shown below. The Network
function cannot be used if other IP addresses are set.
CLASS A: 10.0.0.0 ~ 10.255.255.255
CLASS B: 172.16.0.0 ~ 172.31.255.255
CLASS C: 192.168.0.0 ~ 192.168.255.255
Subnet Mask
:
When connecting an xDSL modem or terminal adapter
directly to the TU-604CI, input the subnet mask indicated in
the documentation supplied by your provider. Normally input
255.255.255.0.
w Set "OFF".
Default Gateway
When connected to a gateway (router), input its IP address.
Primary DNS Secondary DNS
If there is only one DNS address indicated in the documentation
supplied by your provider, input it at "Primary DNS". If there are
two or more DNS addresses, input the first one at "Secondary
DNS".
W hen all inputs are completed, "Proxy settings"appears.
b When connecting to the network via a Proxy server, select "Proxy"
<SELECT/ENTER>
and press
<SELECT/ENTER>
.
[o p]
or to set "DHCP" to "ON", then
.
<SELECT/ENTER>
.
to set "DHCP" to "OFF", then press
.
(vpage 13 "Entering characters").
:
:
(vpage 18 "Proxy settings").
n Proxy settings
Make this setting when connecting to the Internet via a proxy server.
*Network Setup
q Select "Proxy".
Proxy
*Proxy
w Set "ON".
• ON
e S electing the
input method *Proxy
Example) Address • Address –
r Input the
*Proxy Address
address
000.000.000.000
or domain
name.
t Input the port *Proxy Port
number. 00000
q S elect menu "Network Setup" – "Network Setup" – "Proxy" and
<SELECT/ENTER> [ENTER]
press or .
<SELECT/ENTER> [o p]
w T urn or to set "Proxy" to "ON" and press
<SELECT/ENTER>
.
The proxy server is enabled.
<SELECT/ENTER> [o p]
e T urn or to select the proxy server input
<SELECT/ENTER>
method, and then press
[Selectable items]
Address : Select when inputting by address.
Name : Select when inputting by domain name.
r I nput the proxy server address or domain name (vpage 13
"Entering characters").
<SELECT/ENTER>
t P ress and input the proxy server port number.
Returns to step w display once all entries are completed.
ENGLISH
–
[ENTER]
.
or