Example Of Display Of Default Values; Operations; Entering Characters - Denon TU-604CI - Multi-Zone Dual AM/FM Tuner Owner's Manual

ENGLISH
Symbols used to indicate buttons in this manual
Button located on both the main unit and the remote control
unit
Button only on the main unit
Button only on the remote control unit
<SHIFT> <SELECT/ENTER>
DIMMER
SETUP
[CHANNEL + –]
DIMMER
[uiop]
SETUP

Setup
BUTTON
<BUTTON>
[BUTTON]
Example of Display of Default
Values
In lists of selectable items or adjustable ranges, the item
surrounded by a border is the default value.
[Selectable items]

Operations

<RETURN/STATUS>
For all settings, refer to "Menu Map" (vpage 14).
For details of individual settings refer to the explanations of settings
(vpage 15 ~ 20).
1
SETUP
Press
The TU-604CI enters the "SETUP" mode and the first level
menu is displayed.
2
Select the required item on the menu and set it.
Using the menu
n To select the item to be set
<SELECT/ENTER>
Turn
[ENTER] set appears.
n To enable lower level menu items to be displayed
[RETURN]
<SELECT/ENTER>
Press
n To return to higher level menu items
<RETURN/STATUS>
Press
n To confirm selected item
[ENTER]
.
n To exit SETUP mode
SETUP
Press
Bright Dim Dark OFF
.
[o p]
or press until the item you want to
[ENTER]
or .
[RETURN]
or .
<SELECT/ENTER>
Press
.

Entering characters

In TU-604CI Setup, enter characters and digits for the following
items.
Enter according to the following procedure.
q Preset channel name
w Tuner unit name
e IP address
r Proxy
[Characters that can be input]
A ~ Z a ~ z 0 ~ 9 ! # % & ' ( ) * + , - . / : ; < = " > ? @ [ \ ]
n To select the character
<SELECT/ENTER> [ui]
Turn or press
to input appears.
n To confirm selected character
<SELECT/ENTER> [ENTER]
Press or .
• Confirms the character and moves the cursor to next right.
• Confirms entry of character string when the final character
operation is performed.
n To move the cursor
[o p]
Press .
n To insert a space at the cursor position
[CHANNEL +]
Press .
n To delete a character at the cursor position
[CHANNEL –]
Press .
n To cancel the current entry operation and return
to the original state
<RETURN/STATUS> [RETURN]
Press or
n To confirm a character string
<SHIFT>
Press .
• Irrespective of cursor position, the character string being input is
or
stored.
• Ends character entry mode.
(space)
until the character you want
.