Rds Search; Pty Search; Tp Search; Rt (Radio Text) - Denon TU-604CI - Multi-Zone Dual AM/FM Tuner Owner's Manual

RDS Search

Use this function to automatically tune to FM stations that provide
the RDS service.
1
TUNER SELECT
Press to select
"TUNER2" or tuner unit with installed ACD-AMFM
(sold separately).
2
RDS
Press until "RDS SEARCH" appears on the
display.
3
<SELECT/ENTER> [CHANNEL + –]
Use or
The search for RDS stations begins automatically.
b If no RDS stations are found with the above operation, all the
reception bands are searched.
b When a broadcast station is found, that station's name appears on
the display.
4
To continue searching, repeat step 3.
b If no RDS station is found when all the frequencies have been
searched, "NO RDS" is displayed.

PTY Search

Use this function to find RDS stations broadcasting a designated
program type (PTY).
For a description of each program type, refer to "Program Type
"TUNER1",
(PTY)".
1
TUNER SELECT
Press
"TUNER2" or tuner unit with installed ACD-AMFM
(sold separately).
2
RDS
Press until "PTY SEARCH" appears on the
display.
.
3
Watching the display, press
program type.
4
<SELECT/ENTER>
Use
PTY search begins automatically.
b If there is no station broadcasting the designated program type
with the above operation, all the reception bands are searched.
b The station name is displayed on the display after searching
stops.
5
To continue searching, repeat step 4.
b If no station broadcasting the designated program type is found
when all the frequencies have been searched, "NO PROGRAM"
or "NO PROGRAMME" is displayed.

TP Search

Use this function to find RDS stations broadcasting traffic
programs (TP stations).
1
to select "TUNER1",
2
3
PTY
to call out the desired
b If no TP station is found with the above operation, all the reception
bands are searched.
b The station name is displayed on the display after searching
[CHANNEL + –]
or .
stops.
4
b If no other TP station is found when all the frequencies have been
searched, "NO PROGRAM" or "NO PROGRAMME" is displayed.

RT (Radio Text)

"RT" appears on the display when radio text data is received.
1
2
b While receiving an RDS broadcast station, the text data broadcast
from the station is displayed.
b To turn the display off, press
b If no text data is being broadcast, "NO TEXT DATA" is displayed.
TUNER SELECT
Press to select
"TUNER2" or tuner unit with installed ACD-AMFM
(sold separately).
RDS
Press until "TP SEARCH" appears on the
display.
<SELECT/ENTER> [CHANNEL + –]
Use or
TP search begins automatically.
To continue searching, repeat step 3.
TUNER SELECT
Press to select
"TUNER2" or tuner unit with installed ACD-AMFM
(sold separately).
RT
Press .
RT
.
ENGLISH
"TUNER1",
.
"TUNER1",