Removing the front bezel
Front
bezel
Complete the following steps to remove the front bezel.
Note:
1. Turn off the server and peripheral devices.
2. Disconnect the power cord; then, disconnect all external cables from the server.
3. Remove the three screws from the top of the bezel.
4. Pull the bezel away from the server front.
5. Store the bezel in a safe place.
To replace the front bezel, reverse the previous steps.
58
xSeries 305 Type 8673: Hardware Maintenance Manual and Troubleshooting Guide
v Read "Handling static-sensitive devices" on page 29.
v Read "Safety information" on page 87.