IBM 867372X Maintenance And Troubleshooting Manual page 82

Note: See "Server" on page 80 to determine which components should be replaced by a field service technician.
Error code/symptom
1762 (Hard disk configuration error - IDE
only)
178X (Hard drive error - IDE only)
1800 (No more hardware interrupt
available for PCI adapter)
1801 (No more ROM space available for
PCI adapter)
1962 (Drive does not contain a valid boot
sector)
2400 (Video controller test failure)
2462 (Video memory configuration error)
5962 (IDE CD-ROM drive configuration
error)
8603 (Pointing-device error)
00012000 (Machine check architecture
error)
00019501 (Microprocessor not functioning) 1. Microprocessor
00019701 (Microprocessor failed BIST.)
00180100 (No room for PCI option ROM)
00180200 (No more I/O space available
for PCI adapter)
72
xSeries 305 Type 8673: Hardware Maintenance Manual and Troubleshooting Guide
FRU/action
1. Hard disk drive.
2. Hard disk cables.
3. Run the Configuration/Setup Utility program.
4. System board.
1. Hard disk drive cables
2. Hard disk drive
3. System board
1. Run the Configuration/Setup Utility program.
2. Remove adapter.
1. Run the Configuration/Setup Utility program.
2. Remove adapter.
3. Disable adapter BIOS and Run the Configuration/Setup Utility
program.
1. Verify that a startable operating system is installed.
2. Run the drive diagnostics.
3. Hard disk drive.
4. Hard disk drive backplane.
5. Cable.
6. System board.
v System board
v System board
1. Run the Configuration/Setup Utility program.
2. CD-ROM drive.
3. CD-ROM power cable.
4. IDE cable.
5. System board.
6. Battery.
1. Pointing device
2. System board
1. Microprocessor
2. System board
2. System board
1. Microprocessor
2. System board
1. Run the Configuration/Setup Utility program.
2. Adapter.
3. System board.
1. Run the Configuration/Setup Utility program.
2. Failing adapter.
3. System board.