3.
Do not step on the brake.
4.
Press the
twice to confirm pit stop mode.
5.
Turn the key off and remove the key.
6.
Exit and lock the vehicle.
Use the following procedure to exit Pit Stop Mode:
1.
Enter the vehicle.
2.
Place the key into the on (not the crank or start) position.
3.
Step on the brake (this causes the system to exit Pit Stop Mode).
c c o o d d e e h h o o p p p p i i n n g g
If the transmitter is pressed many times out of range, or the
battery is removed, the transmitter may get temporarily out of
sync and fail to operate the system. To synchronize the trans-
mitter, simply press
the vehicle. The system will automatically synchronize and the
transmitter will respond normally.
© 2004 Directed Electronics, Inc.
button twice. The parking lights will flash
r r e e - - s s y y n n c c h h r r o o n n i i z z e e
® ®
or
several times within range of
33