Chapter 3
Configuring the Cisco IP Conference Station 7936
Step 9
Changing the Administrator Password
Timesaver
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
OL-4746-01
Press the Menu button to return to the Admin Setup menu options.
The IP Conference Station automatically restarts.
Follow these steps to change the administrator password:
You can also use the Cisco IP Conference Station 7936 web interface to change
options. See the
"Cisco IP Conference Station 7936 Web Interface" section on
page
3-33.
Press the Menu button.
Press the Up or Down scroll button to select the Admin Setup menu.
Press the Select button.
Enter the administrator password. (The default administrator password is **#.)
Press the Enter softkey.
Press the Up or Down scroll button to select Change Passcode and then press the
Select button.
Use the dialing pad to enter the new password in the Passcode field.
a.
Use the < softkey to correct any mistakes.
Re-enter the new password in the Confirm field.
b.
Press the Save softkey to save the new password, or press the Cancel softkey to
exit without saving.
Cisco IP Conference Station 7936 Administration Guide
Changing the Administrator Password
3-23