Using Ping - Cisco IP CONFERENCE STATION 7936 Administration Manual

Using Ping

Step 4
Step 5
Step 6
Step 7
Using Ping
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Cisco IP Conference Station 7936 Administration Guide
4-2
Enter the administrator password (the default administrator password is **#) and
then press the Enter softkey.
Press the Up or Down scroll button to select Diagnostics, and then press the
Select button.
Select Network Statistics and press the Select button.
The following statistical information appears.
Network stats (for example, Auto-FDX-100Mbps or 10Mbps-HDX)
•
Rcv: count of frames received
•
Xmt: frames transmitted
•
REr: frames received in error
•
BCast: broadcast frames
•
Use the Clear softkey to clear the current counts and start all counts at zero for
the current session.
Press the Menu button to go back to the Diagnostics menu, or press the Exit
button to return to the resting display.
You use Ping to test network connectivity to another device. Ping is available
through the Diagnostics menu.
Follow these steps to use Ping.
Press the Menu button
Press the Up or Down scroll button to select Admin Setup.
Press the Select button.
Enter the administrator password (the default administrator password is **#) and
then press the Enter softkey.
Press the Up or Down scroll button to select Diagnostics, and then press the
Select button.
Select Ping and press the Select button.
Chapter 4 Troubleshooting the Cisco IP Conference Station 7936
OL-4746-01