Default Settings - Cisco IP CONFERENCE STATION 7936 Administration Manual

Chapter 3 Configuring the Cisco IP Conference Station 7936
Step 5
Step 6
Step 7

Default Settings

Setting (Default Value)
Administrator password
(**#)
End-user password
(7936)
CM1 address
(no default)
CM2 address
(no default)
CM3 address
(no default)
OL-4746-01
Press the Down scroll button to select Restore Defaults.
Press the Select button.
The following message appears:
All settings and data will be lost, including the Phone Book entries.
Press Yes to confirm or No to exit.
Press the Yes softkey to confirm the restore, or press the No softkey to exit.
A message appears confirming that the settings have been restored to the defaults
and the IP Conference Station will restart.
You must hang up all calls before you can restart the
Note
IP Conference Station.
The IP Conference Station default settings are detailed in the following table.
Valid Options
-
-
-
-
-
Administrator- User-
controlled controlled
Y N
Y N
N N
N N
N N
Cisco IP Conference Station 7936 Administration Guide
Erasing the Local Configuration
Notes
Set by
Cisco CallManager
(via the .cnf.xml file)
Set by
Cisco CallManager
(via the .cnf.xml file)
Set by
Cisco CallManager
(via the .cnf.xml file)
3-17